Time Delay Relay II
- When activated by pressing a button, this time delay relay will activate a load after a specified amount of time. This time is adjustable to whatever you want simply by changing the value of a resistor and/or capacitor. The current capacity of the circuit is only limited by what kind of relay you decide to use.
Schematic
Parts:
| Part | Total Qty. | Description | Substitutions |
| C1 | 1 | See Notes | |
| R1 | 1 | See Notes | |
| D1 | 1 | 1N914 Diode | |
| U1 | 1 | 4011 CMOS NAND Gate IC | |
| K1 | 1 | 6V Relay | |
| S1 | 1 | Normally Open Push Button Switch | |
| MISC | 1 | Board, Wire, Socket For U1 |
Notes:
1. Email jawaharlal@excite.com with comments, questions, etc.
2. To calculate the time delay, use the equation R1 * C1 * 0.85=T, where R1 is the value of R1 in Ohms, C1 is the value of C1 in uF, and T is the time delay in seconds.
3. S1 may be replaced with an NPN transistor so the circuit can be triggered by a computer, other circuits, etc.
4. Most any 6V relay will work for K1. If you use a large relay, you my need to add a transistor to the output of the circuit in order to drive the larger load.
Title: Time Delay Relay II
electronic circuit
Source: www.aaroncake.net/circuits/
Published on: 2005-02-10
Reads: 841
Print version: 
Other electronic circuits and schematics from Miscellaneous
-
Flyback Transformer Driver
-
S-video to RCA
-
Ultrasonic Pest Repeller
-
Pot plant water tester
-
Time Delay Relay
-
7 Segment LED Counter
-
Nocturnal Animals Whisker
-
Simple Lie Detector
-
Cellular Phone calling Detector
-
Economical Pump Controller